Concrete Patios and Walkways for Austin Backyards
A patio quote is mostly a drainage decision with a price attached. A broom-finish concrete patio runs about $8 to $14 per square foot on a Texas contractor's price page, and Austin cost data puts patios at $4 to $10 per square foot, with most homeowners spending $3,040. Inside Austin a backyard patio usually needs no permit; in some suburbs it does.
Published price range in Texas: Broom-finish concrete patio, installed$8–$14 per sq ftSource: Lucky's Concrete price page, price data from September 17, 2026
Tell us about the job and our vetted local concrete pro gets back to you. No obligation.
- Price ranges from sourced dataUpdated September 17, 2026
- 4towns covered in Austin
Reviewed by: Patrik Lorentzson, Editor, Austin Trusted Concrete · Last reviewed
General information only, not advice for your project. Austin Trusted Concrete does not advise on, design or manage projects; the contractor you choose does.
What does a patio cost in the Austin area?
About $8 to $14 per square foot for a broom finish, with Austin cost data lower at $4 to $10. Three published figures bracket it:
- A Texas contractor's price page (the same numbers appear for its Georgetown and Dallas locations, so treat them as a Texas range): broom-finish patios around $8 to $14 per square foot, stamped or decorative work around $14 to $22, before base prep.
- Austin cost data: $4 to $10 per square foot including materials and labor, $1,781 to $4,334 on average.
- A national cost guide: $5 to $18 per square foot for a new patio.
The spread comes mostly from the finish, the base work and site access. The Austin concrete price guide ranks those factors, and stamped concrete in Austin covers decorative finishes.
Does a backyard patio in Austin need a permit?
Usually not. The city says flatwork such as sidewalks and driveways that isn't in the public right-of-way doesn't need a building or Driveway/Sidewalk permit, while the work still has to follow the residential code. One exception: on a property with a septic system, an on-site sewage facility review is required when a project increases the footprint of development, and the city lists adding a patio as an example.
The suburbs are stricter. Georgetown issues patio and flatwork permits with a setback inspection, and Pflugerville permits flatwork that needs a curb cut.
What about a front walk or sidewalk?
On your lot, it's treated like a patio; at the street, it needs a $275 city permit. A walkway on your lot follows the patio rules above. A sidewalk in the public right-of-way is Driveway/Sidewalk work: Austin charges $275 for a new DS permit, and a sidewalk inspection costs $336.65 per inspection plus $1.77 per linear foot. For the concrete itself, a Texas contractor lists residential sidewalks at about $8 to $13 per square foot as a starting range.
How do Austin summers change a patio pour?
It mostly moves the start time earlier and adds retarder to the mix. Summer heat speeds up set time and raises the risk of plastic shrinkage, and most Austin contractors price retarder additives into summer bids as standard. A patio poured in July is not a different product, but ask when the crew plans to start, how the slab will be cured and whether retarder is in the price. More on timing in Austin concrete questions.
Sources
- Lucky's Concrete (Georgetown page): concrete patios, September 17, 2026
- Lucky's Concrete (Austin page): concrete sidewalks, September 17, 2026
- Angi: concrete patio cost in Austin, TX (updated Aug 4, 2026), September 17, 2026
- ConcreteNetwork: concrete patio cost (national, 2026), September 17, 2026
- City of Austin Development Services: residential plan review, September 17, 2026
- City of Austin Transportation and Public Works: right-of-way permits and fees, September 17, 2026
- SlabCalc: concrete driveway cost, Austin TX (Texas model), September 17, 2026
Get one written number from our vetted local concrete pro
Four fields, no obligation, and your details go to one pro rather than a list. Send the request and we come back to you.
Frequently asked questions
Is a bigger patio cheaper per square foot?
Often, yes, because setup and delivery are spread over more area, but it depends on the site. Austin cost data shows a 10×10 patio at $400–$1,000 and a 20×20 at $1,600–$4,000. Ask for a square-foot price and a total on the quote.
Can a patio and a walkway be quoted together?
Yes. Choose the patio in the form and mention the walkway, so both are measured on one visit and share a single delivery.